Dedicated Micros NetVu Console Guía de instalación Pagina 1

Installation Guide

10HD NetVu Console10Modes of operationThe HD NetVu Console can be set to operate in ‘Encoder’ ‘Console’ or ‘DVR’ mode on the Features page, refer to ‘

100HD NetVu Console100Pulse Ext (s) A pulse extension is used to prevent double triggers on a single alarm. The pulse extension time starts on an ala

101NV1Installation Guide101Zone InputsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not

102HD NetVu Console102Alarm Protect sec. This is the minimum time period in seconds (from the start of the alarm) that is protected from being overwr

103NV1Installation Guide103Activity (Green) Select to open the Alarm->Activity menuZone Act (Yellow) Select to open the Alarm->Zone Actions me

104HD NetVu Console104Zone ActionsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

105NV1Installation Guide105Alarm Reporting This must be enabled to allow the unit to send an alarm notication to an external destination i.e. an RVR

106HD NetVu Console106Zone Actions Camera - For reference onlyZone Select a zone (alarm) to congure.Primary Camera This allows a camera to be assig

107NV1Installation Guide107Masked Cam DetectionNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they

108HD NetVu Console108Contrast Denes the contrast threshold the system uses to dene that a camera is masked. Different cameras have different chara

109NV1Installation Guide109Alarm ResponseNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are n

11NV1Installation Guide11Encoder ModeConnect up to 4 analogue cameras to the BNC inputs labelled ‘CAM 1’ to ‘CAM 4’. If one or more of these cameras h

110HD NetVu Console110Prole Change Select to enable the unit to switch from Normal to Event recording following alarm activation.Alarm Reporting Th

111NV1Installation Guide111ActivityNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not ava

112HD NetVu Console112Grid Editor Use the Grid Editor by placing cells in areas of the camera view where movement will trigger an alarm. To enter cel

113NV1Installation Guide113VMDNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not availabl

114HD NetVu Console114Mode The zone mode identies when the reference image is taken for triggering VMD. The options are:Normal - The reference ima

115NV1Installation Guide115Global ActionsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are n

116HD NetVu Console116Network SettingsThe Network Settings menus allow conguration of the unit’s network functionality. Key network settings can be e

117NV1Installation Guide117NetworkNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

118HD NetVu Console118PPP Idle Line Timeout s This is the time (in seconds) the unit will wait before disconnecting the PPP (Point to Point Protocol

119NV1Installation Guide119Live TransmissionsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they a

12HD NetVu Console12DVR ModeThe HD NetVu Console is also a fully edged, enterprise class video server supporting analog and IP inputs. With embedded

120HD NetVu Console120Res For MPEG and JPEG transmission, select image resolution settings (4CIF, 2CIF, CIF or QCIF). Size_rate For JPEG, the gure

121NV1Installation Guide121Multicast SetupNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are

122HD NetVu Console122Multicast Method Select the multicast forwarding method. Select from ‘SAP’ (to use session announcement protocol operation), ‘H

123NV1Installation Guide123EmailNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not availa

124HD NetVu Console124Sender E-mail These optional elds indicate the source of the e-mail notication. If the elds are left blank the unit will use

125NV1Installation Guide125Remote ReportingNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are

126HD NetVu Console126Alarm Server ref. ID This is the reference name/ID that will be presented to the RVRC viewing application. It should therefore

127NV1Installation Guide127Web CamNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

128HD NetVu Console128Password If it is necessary to use an authentication process to access the webcam server, enter the relevant password here.Upda

129NV1Installation Guide129FTP DownloadNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not

13NV1Installation Guide13InstallationFront Panel connections DataUSB 3x USB connector (2 normal / 1 micro size)LEDs Power Will illumina

130HD NetVu Console130Download options Select one of the following options from the drop down menu:On Connection This will automatically start the Ar

131NV1Installation Guide131FirewallThis page allows conguration of the on-board rewall. The top ports are pre-congured with typical settings that c

132HD NetVu Console132ConnectionsThis page shows the IP addresses of users connected to this unit. It is for information only and cannot be edited or

133NV1Installation Guide133Features & TextNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they

134HD NetVu Console134Event SearchNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

135NV1Installation Guide135Event Search ResultsAfter selecting ‘Search’ (Red), a still image of each captured event (within the chosen search criteria

136HD NetVu Console136Operating the ViewerNavigation is via a colour coded softkey system. The colour bar provides an intuitive approach to operator a

137NV1Installation Guide137View ControlThe View Control page allows the connected video input to be displayed full screen Red Full Show currently se

138HD NetVu Console138Video ControlThe Video Control page offers video playback functions i.e. play, pause, rewind and fast forward.Red ll Freezes c

139NV1Installation Guide139Selection PageThe Selection page allows access to various image and event playback functions.Red Play Switches the select

14HD NetVu Console14Rear Panel connections Data SERIAL 1 RS-232 / RS-485 / RS-422 (3 wire & 9 wire) NET 1 RJ45 Ethernet network connector,

140HD NetVu Console140PTZ Program OptionThe Program page allows preset settings for PTZ cameras to be established and an ‘Origin’ base position establ

141NV1Installation Guide141Program PageThe Program Menu page allows the PTZ conguration on the currently selected Telemetry camera to be accessed and

142HD NetVu Console142Dome Menu OptionThe Dome Menu page allows camera specic menus imbedded on the currently viewed Telemetry camera to be accessed

143NV1Installation Guide143Point&goPoint&go enables an Oracle Dome camera to be controlled directly via the cursor. Select anywhere on the dis

144HD NetVu Console144Timeline NavigationThe Timeline Navigation page and the accompanying Video Timeline feature allows quick and easy investigation

145NV1Installation Guide145Video TimelineThe Video Timeline allows intuitive, rapid navigation within recorded video. To aid navigation, the timeline

146HD NetVu Console146Change ScaleUtilise the buttons shown below to change the scale. Note: The coloured softkey buttons can also be used to alter t

147NV1Installation Guide147Event ListAlarms and activity detection, plus system Events i.e. camera fails, are tagged and stored in the Event List. Eac

148HD NetVu Console148Event Copy and Search MenuThe Event Copy and Search menu allows events to be sent to the Copy menu via the Copy Option. All even

149NV1Installation Guide149Filter Search MenuWhen searching a large number of stored events, the Filter Search menu allows events to be ltered by tim

15NV1Installation Guide15Connecting the HD NetVu ConsoleStep 1 - Connecting a MonitorMON AREMOTEAUDIO OUTAUDIO INCAM 1CAM 2CAM 3CAM 4HDMI 1USBSTATUSPO

150HD NetVu Console150 Cameras Select which cameras are to be included within the Event search. A range of cameras can be selected by entering a hyp

151NV1Installation Guide151Activity Search MenuThe Activity Search menu allows the search criteria to be further narrowed to only include events which

152HD NetVu Console152Red Blank Select to remove all data currently displayed in the Filter Search Box.Green Reset Select to reset the Filter Sear

153NV1Installation Guide153Activity Grid MenuThe Activity Grid menu allows the event search criteria to be further narrowed to only display events wh

154HD NetVu Console154IMPORTANT: The area (cells) highlighted yellow constitutes the activity detection zone. Any activity events occurring within

155NV1Installation Guide155Copy MenuImages and events can be copied to a USB Media for remote reviewing away from the unit (for evidential or monitori

156HD NetVu Console156Appendix A - Pin-outs - For reference onlyNote: Greyed text refers to features that will be available if the mode is changed fr

157NV1Installation Guide157Appendix B - User LoggingUser Activity LoggingUser Activity logging can be enabled or disabled via the System -> Feature

158HD NetVu Console158Appendix C - ‘About’ PagesThe following pages detail the menus available via the ‘About’ conguration option (System->Status-

159NV1Installation Guide159Camcong DetailsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are

16HD NetVu Console16Step 3 - Connecting to the NetworkKBDSERIAL 1ALARMS/RELAYS NET 1 NET 0 POEPWRINThe HD NetVu Console supports tw

160HD NetVu Console160CapabilitiesThis information page shows the capability settings for the camera. These parameters determine how the camera perfor

161NV1Installation Guide161UI InformationThe UI page shows the settings stored in the camera which congure the user interface.About (Blue) Opens the

162HD NetVu Console162Camera OverviewThis page details the general settings assigned to each of the local camera channels. To edit the settings assig

163NV1Installation Guide163IP Network LoadThis page illustrates the network trafc utilised by the unit. The page refreshes every second. Refresh (Pur

Appendix D - IP Address via Serial For guidance on locating the unit’s IP address via a serial port connection, please see below:Locating the unit IP

165NV1Installation Guide165Appendix E - MulticastThe Multicast page allows recordings from the unit’s camera input to be forwarded to a port address.

166HD NetVu Console166Appendix F - Monitor OutputOpen a File Transfer Protocol (FTP) client to connect to the unit, refer to the FTP client’s supporti

167NV1Installation Guide167Appendix G - Unit SpecicationLANGUAGES Currently: English, French, Italian, German, Spanish, Russian, Czech, Danish, Finni

168HD NetVu Console168WEB PAGE CONFIGURATION Simple Web page conguration will allow the following functions to be congured: Unit setup, Manual updat

169NV1Installation Guide169Notes

17NV1Installation Guide17Operation on a Standard IP NetworkLocating the Unit’s IP addressThe unit is congured using on-board web pages. This can be d

170HD NetVu Console170IndexAbout ... 32Accessing & Conguring the Unit ..

171NV1Installation Guide171Power ... 14PowerScript Mgmt ...

MI-I-NVC2-E1-0Dedicated Micros France9-13 rue du Moulinet75013 Paris, FranceDedicated Micros, Australia PTY.5/3 Packard Avenue, Castle Hill,NSW 2154,

18HD NetVu Console18Step 4 - Connecting PowerIPWRINNET 0 POESERIAL 1ALARMS/RELAY KBD NET 1 The HD NetVu Console can use either the external P

19NV1Installation Guide19Optional 2 - Alarms / Relays KBDSERIAL 1ALARMS/RELAYS NET 1 NET 0 POEPWRINAlarmsThe unit supports 4 normal

2HD NetVu Console2Whilst every attempt is made to ensure these manuals are accurate and current, Dedicated Micros reserve the right to alter or modify

20HD NetVu Console20KeyboardThe NetVu Console Keyboard enables a high degree of control over connected cameras.Button Description FunctionLIVEPLAY

21NV1Installation Guide21COPY Copy Button functionality for future development. Pause In Live mode – Freeze the current display window. In play

22HD NetVu Console22 Iris Open / Iris Close Control of telemetry functions. Lamps Control of telemetry functions.AUTOPAN Auto pan Control of te

23NV1Installation Guide23Accessing & Conguring the UnitThe unit can be congured either on the local monitor or over the network using a PC with

24HD NetVu Console24Main MenuThe main menu will be displayed when rst accessing the unit remotely. This menu allows access to the Conguration and Vi

25NV1Installation Guide25Navigating The MenusThe menu tree provides access to the conguration menus. The conguration pages are navigated using the m

26HD NetVu Console26Entering Alpha-Numeric Data via a Local MonitorNumeric or text data is entered using the on-screen Virtual Keyboard (Arrow Key Edi

27NV1Installation Guide27System SettingsThe menus under the System Settings heading allow the unit’s core settings to be viewed, changed and the syste

28HD NetVu Console28AttributesThis menu shows the general information about the unit including the version of software installed, the unit’s serial nu

29NV1Installation Guide29Note: The above address information is split into two columns. Each column relates to either Network port 1 (Net 1) or Netw

3NV1Installation Guide3IntroductionWhat is the…High Denition NetVu Console ? Enabling customers to deploy an additional viewing & control statio

30HD NetVu Console30Unit Status This menu details information regarding the status of the unit, notably the total time the unit has been operating and

31NV1Installation Guide31Alarm StatusNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not a

32HD NetVu Console32AboutThese menu allows access to numerous system information pages and detail various system logs. Select the an icon to view the

33NV1Installation Guide33Camcong Details Select to open the Camera Attributes menu. This menu provides detailed information on the type of camera i.

34HD NetVu Console34LogsThe log les stored in the camera can be accessed from this page. Selected logs are displayed on the page below.About (Blue)

35NV1Installation Guide35Network Security LogsThe log les stored in the camera can be accessed from this page. Selected logs are displayed on the pag

36HD NetVu Console36LanguageThis menu allows the system language to be set. Changing the System Language will effect all menu pages. If required, the

37NV1Installation Guide37Time and Date This menu allows the time and date to be set on the unit. Required timezone information can also be established

38HD NetVu Console38PC Time Displays the system time of the PC currently being used to view the webpages.Sync Time (Blue) Use this button to synchro

39NV1Installation Guide39Serial Ports This menu allows conguration of the unit’s Serial ports. For installation information, refer to the optional st

4HD NetVu Console4 FeaturesThe HD NetVu Console from Dedicated Micros is equipped with an array of valuable features designed to enhance the operator

40HD NetVu Console40Note: When a telemetry protocol is selected, these settings will default to pre-determined values and should not normally be alt

41NV1Installation Guide41 patterning. If a particular channel is not in use or the camera has failed, select ‘Not Connected’. Fail Rep Select this

42HD NetVu Console42AudioThe Audio menu allows settings for the bi-directional audio channel to be edited. Audio can be recorded from line input. Chal

43NV1Installation Guide43Features These menus enables the activation of numerous system features. Features are grouped within four sub-menus: System,

44HD NetVu Console44Note: When de-selected here, the ‘E-mail Reporting’ menu will no longer be displayed in the menu tree. Remote Reporting Select t

45NV1Installation Guide45NetworkNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not availa

46HD NetVu Console46VideoDetected Video Standard The unit automatically detects the video standard being used i.e. PAL/NTSC.Video Resolution (h x v)

47NV1Installation Guide47System (Yellow) Select to open the System->Features->System pageNetwork (Green) Select to open the System->Feature

48HD NetVu Console48OtherNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not available in

49NV1Installation Guide49MaintainThis menu allows the unit to be reset and a software upgrade to be performed via an inserted CD-R/DVD-R or a connecte

5NV1Installation Guide5Point&go provides the user with easy to use, fast, accurate telemetry control via an attached monitor. With no need for a t

50HD NetVu Console50Note: For the latest software upgrades, please refer to the Dedicated Micros website: www.dedicatedmicros.comNote: Selecting the

51NV1Installation Guide51PowerScript MgmtThis menu enables installed PowerScripts to be activated/deactivated on start-up. Use the tickbox(es) to sele

52HD NetVu Console52USB CongurationNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not av

53NV1Installation Guide53Clear Video (Red) This button will remove the reference to the video stored on the USB devices, allowing them to be overwrit

54HD NetVu Console543. Allocate the formatted and mounted storage for video storage by clicking on the ‘Allocate’ button. Allocation takes between a

55NV1Installation Guide55 The system displays a conrmation box to ensure the correct device has been selected. Click OK to conrm, then reboot the sy

56HD NetVu Console56Console SettingsThe menus under the Console Settings heading allow the unit’s Viewer display settings to be altered and User Accou

57NV1Installation Guide57SystemsThe unit can be congured with up to 20 systems. A system is a collection of DVRs and cameras selected from those DVRs

58HD NetVu Console58Auto Fill When the Server URL has been entered, select the ‘Auto Fill’ option to auto include the Server Name and ALL available c

59NV1Installation Guide59Systems OverviewThis menu gives an overview of all connected cameras and their home servers across all systems. The numbers a

6HD NetVu Console6Design of the manualFor ease of use, this manual has three parts:1. Installation Shows details of how to install the unit and conne

60HD NetVu Console60Remote MonitorsThis menu allows monitors not physically connected to the unit to view camera images received by the unit. The IP a

61NV1Installation Guide61Viewer Defaults This menu allows conguration of settings for the Viewer function. For more information regarding this featur

62HD NetVu Console62Video Output mode Select the display output that best suits the viewing monitor. Typically PAL Default is most suited for a CRT m

63NV1Installation Guide63Display This menu allows conguration of monitor settings used when viewing camera images and text data.Main monitor text I

64HD NetVu Console64Enable custom segment setup Select to activate the custom segment setup feature. When selected, a user can congure a Quad or Mul

65NV1Installation Guide65MapsThis menu allows images to be imported and used as maps that can be displayed in the Viewer Menus. The map can then have

66HD NetVu Console66Increment by If using the Decrement (Red) or Increment (Green) buttons, enter the size (in pixels) that the hotspot will increase

67NV1Installation Guide67Map DataThe Map Data menu allows Map Cong data to be Imported/Exported. This enables map data to be saved and stored for fut

68HD NetVu Console68User Accounts The unit can protect conguration procedures by limiting access via usernames and passwords. Account Types The avai

69NV1Installation Guide69• Local Users Assigning Local Users access privileges will limit access to the Viewer pages for local users. When implemente

7NV1Installation Guide7Important SafeguardsRead InstructionsAll the safety and operating instructions should be read before the unit is operated.Power

70HD NetVu Console70Camera SettingsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not ava

71NV1Installation Guide71Camera SetupNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not a

72HD NetVu Console72Type The settings will default to ‘Colour’. If Monochrome cameras are used, select ‘Mono’. Selecting ‘Mono’ will remove colour pa

73NV1Installation Guide73IP Camera - For reference onlyIf a NetVu Connected IP Source is selectedIP Type Select the type of NetVu Connected source th

74HD NetVu Console74 Remote codec When selected, the unit will utilise the codec in the remote NetVu connected video server/camera to allow change

75NV1Installation Guide75Camera Lens Conguration - For reference onlyThis page allows different lens de-warping techniques to be applied to connected

76HD NetVu Console76Camera OverviewNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not ava

77NV1Installation Guide77IP Stream InputsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are n

78HD NetVu Console78IP Camera (Yellow) Select to open the IP Camera Conguration menu.Schedule (Blue) Select to open the Schedule->Setup pageRefr

79NV1Installation Guide79 Remote codec When selected, the unit will utilise the codec in the remote NetVu connected video server/camera as if it wa

8HD NetVu Console8Regulatory Notes and FCC and DOC Information(USA and Canadian Models Only)Warning: This equipment has been tested and found to compl

80HD NetVu Console80Unallocated CamsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not av

81NV1Installation Guide81Record SettingsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are no

82HD NetVu Console82DefaultNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not available i

83NV1Installation Guide83Prole Record Note: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not

84HD NetVu Console84Unset/Set/Override Event Shows the recording quality that will be used by the camera during an Alarm or Event. Note that Set and

85NV1Installation Guide85Advanced Record Menu View Switch to the Simple Prole Record menu.Note: When Advanced Record settings have been changed, it

86HD NetVu Console86Size If JPEG is selected, the gure entered here will be the size of the JPEG transmitted (in Kbytes). JPEG le sizes can be con

87NV1Installation Guide87JPEG Pre TriggerNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are n

88HD NetVu Console88Protect Video Note: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

89NV1Installation Guide89Reload List This will refresh the video list according to the selections made in the Start Time/Date and End Time/Date dialo

9NV1Installation Guide9Installing the UnitBefore you startCheck the contents of the boxRemove all items from the packaging and check the items listed

90HD NetVu Console90AoE SetupNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not available

91NV1Installation Guide91init cong string This button will remove failed or powered down devices that had previously been recognised and are no long

92HD NetVu Console92ScheduleNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not available

93NV1Installation Guide93SetupNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not availabl

94HD NetVu Console94Enable-N/O Select if the Keyswitch is to be normally open (UNSET). Then choose a contact to be used in a specic zone as the Key

95NV1Installation Guide95RVRCNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not available

96HD NetVu Console96Refresh (Purple) Refreshes the information on the current page.

97NV1Installation Guide97Holiday & WeekendNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they

98HD NetVu Console98Alarm SettingsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not avai

99NV1Installation Guide99InputsNote: Greyed menu option will be available if the mode is changed from Console to DVR or Encoder, they are not availab